For example, if your Keenetic has an IP address of 192.168.1.1 (set by default) with a mask of 255.255.255.0, the computer's IP address must be between 192.168.1.2 and 192.168.1.254 with the same mask.įor information on how to view the network settings (ISP's IP address, MAC address, and gateway IP address) used on your computer's network adapter, see ' How to check the network adapter settings in Windows (IP address, MAC address, and default gateway)'. TIP: Important! The computer's IP address must belong to the same subnet as the LAN IP address of the router. If necessary, you can manually specify a static IP address (select 'Use the following IP address' and enter the IP address and mask in the 'IP address' and 'Subnet mask' fields, respectively). In the Protocol Properties window, select 'Obtain an IP address automatically' to automatically assign a dynamic IP address from the router (where the DHCP server is turned on) to the computer's network adapter. Select 'IP version 4 (TCP/IPv4)' and click 'Properties'. If your computer is not used for running or sharing media files. In the new window, click on the 'Properties' button. In the Local Area Connection Properties dialog, select Internet Protocol Version 4. In the list of network connections that opens, select the connection you are using to connect to your ISP (wireless or LAN). In Windows 10, click Start > Settings > Control Panel > Network and Internet > Network and Sharing Center > Change adapter settings. In Windows 7, go to Start > Control Panel > Network and Sharing Center and click 'Local Area Connection'. The default setting for network adapters in Windows is automatic IP address obtaining, but if you have changed this setting, you can restore it, as shown below.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |